Our
Projects

Engine made a loud pop sound.  The injectors were pulled, and found a hole in number 3 piston. The engine was removed, and a new liner assembly was installed along with new connecting rod and crankshaft bearings.

Truck become hard to shift.  Found the center of the clutch was pushed out, the rear main seal was leaking.  repaired the rear main seal, installed a new clutch and changed out the transmission input shaft.

Rebuilt the air cart loading auger.  New bearings were installed for the auger, a new hydraulic drive motor was installed and then re-hung onto the cart.  The seed meter rollers were rebuilt, along with the seed boxes.